View Cart:
No. Items: 0
Subtotal: $0.00

 

Application Instructions

Heat Seal Instructions for Nail Head Transfers:
Peel clear film from paper backing. Place on garment in desired position, adhesive side down. Cover with thin cloth if desired or if fabric is thin.
 
Laundering items: Turn garment inside out. Do not wash in hot water as the water temperature may reactivate the adhesive causing the patch to peel off of the garment.
 
Using a Heat Seal Machine: Using an Iron:

For most fabrics:

  • 350 degrees for 10-12 seconds
  • Remove clear film, replace cloth, and reapply heat for an additional 10-12 seconds

Delicate Fabrics:

  • Reduce temperature to 325 degrees. Use light pressure for 7-10 seconds.
  • Repeat without film.
  • Pre-heat iron to "cotton" setting. DO NOT USE STEAM DURING APPLICATION
     
  • Position appliqué on garment.Cover design with thin pressing cloth
     
  • Press straight down for 10-12 seconds with constant pressure - NO BACK & FORTH
     
  • Remove clear film, replace cloth and reapply heat for an additional 10-12 seconds.

Heat Seal Instructions for Iron On Appliqués:

Heat seal to polyester/cotton fabrics. Do not apply to rayon, nylon or tri-acetate fabrics. Once applied, appliqué is permanently attached to garment & is washable, dryable and dry cleanable, although washing in hot water and drying on high heat is not recommended.

Using a Heat Seal Machine: Using an Iron:
  • 350 degrees for 20 seconds
     
  • 375 degrees for 15 seconds
  • Pre-heat iron to "cotton" setting. DO NOT USE STEAM DURING APPLICATION
     
  • Position appliqué on garment. Cover design with thin pressing cloth.
     
  • Press straight down for 25 seconds with constant pressure - NO BACK & FORTH
     
  • Allow cooling thoroughly before using.