| APPLICATION INSTRUCTIONS
Heat Seal Instructions for Nail Head Transfers:
Peel clear film from paper backing. Place on garment in desired position, adhesive side down. Cover with thin cloth if desired or if fabric is thin.
| Using a Heat Seal Machine: |
Using an Iron: |
For most fabrics:
- 350 degrees for 10-12 seconds
- Remove clear film, replace cloth, and reapply heat for an additional 10-12 seconds
Delicate Fabrics:
- Reduce temperature to 325 degrees. Use light pressure for 7-10 seconds.
- Repeat without film.
|
- Pre-heat iron to "cotton" setting. DO NOT USE STEAM DURING APPLICATION
- Position appliqué on garment.Cover design with thin pressing cloth
- Press straight down for 10-12 seconds with constant pressure - NO BACK & FORTH
- Remove clear film, replace cloth and reapply heat for an additional 10-12 seconds.
|
Heat Seal Instructions for Iron On Appliqués:
Heat seal to polyester/cotton fabrics. Do not apply to rayon, nylon or tri-acetate fabrics. Once applied, appliqué is permanently attached to garment & is washable, dryable and dry cleanable.
| Using a Heat Seal Machine: |
Using an Iron: |
- 350 degrees for 20 seconds
- 375 degrees for 15 seconds
|
- Pre-heat iron to "cotton" setting. DO NOT USE STEAM DURING APPLICATION
- Position appliqué on garment. Cover design with thin pressing cloth.
- Press straight down for 25 seconds with constant pressure - NO BACK & FORTH
- Allow cooling thoroughly before using.
|
|
